Hi,
The proximity sensor and the distance scanner are different sensors.
The proximity sensor is meant for short-range collision avoidance.
The distance scanner is meant for long-range object detection.
The foot-bot has a set ray length (it's a real robot, in which the range is given), so you can't change it unless you go into the code.
However, the change is simple. For the proximity sensor, check this file
https://github.com/ilpincy/argos3/blob/ ... entity.cpp and change the constant PROXIMITY_SENSOR_RING_RANGE.
For the distance scanner, refer to this file:
https://github.com/ilpincy/argos3/blob/ ... sensor.cpp and change the constants SHORT_RANGE_RAY_END and LONG_RANGE_RAY_END.
Cheers,
Carlo
I made ARGoS.